Daikin Heat Pumps
Don't let the name fool you. A heat pump, when matched with an air handler, is an excellent alternative for both heating and cooling your home. Just think of a heat pump as a heat transporter, extracting warm air from your home during the summer, and reversing operation to bring warm air in during the winter. Though it may be difficult to believe there's enough warmth in outdoor air during the winter to heat your home, Daikin systems can actually deliver heat in conditions as low as -13 degrees Fahrenheit to keep you warm and toasty inside. However, in significantly colder climates, a supplemental heat source may be required.
A year-round home comfort solution, a heat pump and air handler system is particularly effective in moderate to warmer regions of the country, and does a fine job of maintaining comfortable indoor temperatures and humidity levels. It also offers the air filtration benefits inherent to forced-air systems, because air is pulled through an air filter. This removes airborne particles and results in cleaner, filtered air being redistributed to your home through air supply ductwork.
FIT Heat Pump
The Daikin Fit system is a side discharge, smart HVAC system that won't compromise on comfort and connects to ducted solutions traditional to the unitary market. In a market saturated with expensive high-tiered inverters, the system provides a premium mid-efficiency inverter at an affordable rate. The low profile of the outdoor unit offers solutions when a traditional cube style cannot.
Daikin Inverter Technology
Inverter technology helps prevent the common, and uncomfortable, temperature swings normally experienced with non-inverter HVAC systems.
DAIKIN ONE+
The first smart thermostat to offer full two-way communications with Daikin HVAC systems.
Features
- Daikin variable-speed swing compressors
- High-density foam compressor sound blanket
- Compatible with Daikin One+ smart thermostat and other Daikin communicating equipment
- Daikin control algorithmic logic
- Intelligent Defrost Mode
- In communicating mode - only two low voltage wires to outdoor unit required
- Diagnostic indicator lights - seven-segment LED display - and fault code storage
- Daikin Inside intelligence for diagnostics
- Field-selectable boost mode increases compressor speed during unusually high loads
- Quiet DC outdoor fan motor
- Field-installed bi-flow filter drier
- Coil and ambient temperature sensors
- Suction pressure transducer
- Sweat connection service valves with easy access to gauge ports
- Advanced water-shedding drain pan
- Hot start technology
- AHRI Certified - ETL Listed
VRV LIFE™
At the core of the VRV LIFE™ systems is built-in intelligence that gives you independent zoning control with maximum flexibility and energy savings. With the ability to connect up to nine indoor units to one outdoor unit, the space-saving VRV LIFE™ system is ideal for most residential projects.
Features
- Flexibility with mix-match of ducted and duct-free indoor units
- Reduced power consumption with flexibility to turn off indoor units not in use
- Dual-fuel heating with heat pump and gas heat simultaneously
- Space-saving with ability to connect 2 gas furnaces to one outdoor unit
- Quiet operation with sound levels under 58 dBA
- Choice of gas or heat pump heat
- Custom, selectable and programmable temperature to switch from heat pump to gas heat
- Add or remove zones without having to worry about ductwork
- Available in 2, 3, 4 and 5-Ton models
- Excellent zoning flexibility with 1-to-1 and 1-to-multi connections
- Broader diversity with ability to provide cooling and heating in up to 9 zones
- Ability to choose heat pump or multi-zone Dual-Fuel heating capability
- Auto and programmable modes for heat pump to gas heat switch over temperatures
- Compatible with 12 types and 65 models of Daikin VRV indoor fan coil units and 80 - 97% AFUE Daikin up flow and down flow communicating gas furnaces
- Dependable heat pump operation in extreme ambient conditions down to -4°F in heating mode and up to 122°F in cooling mode
- Year round comfort and energy savings delivered by combining VRV and VRT technologies compared to traditional split systems
- Engineered with Daikin's swing Inverter compressor technology
SkyAir Inverter Ducted
The Daikin Inverter Ducted line is an alternative to traditional cube style solutions adopting a slim, space saving and quiet outdoor unit and specifically designed and matched indoor air handling unit. The Inverter Ducted can be used in place of your existing system, utilizing existing ductwork, or in new construction where individual zone or room control is not desired. You get the comfort and energy savings advantages of Daikin's industry leading inverter technology, using a modern heat pump system to heat and cool.
Older, traditional residential heat pump systems may require backup electric heating whenever the outside temperature is below 45°F. Daikin Inverter Ducted systems provide comfortable heating down to 0°F, with up to 100% capacity available as low as 14°F. They can also operate in cooling mode from 23°F to 115°F. In most climates, this makes installation easier since no supplemental electric heater needs to be installed.
Features
- Available in ranges from 18000 to 42000 Btu/h
- Vertical (Upflow) or Horizontal configurations
- Up to SEER 20.0 EER 14.5 and HSPF Up to 12.0
DZ20VC
When properly matched and installed, your ComfortNet™- compatible DZ20VC Variable- Speed Heat Pump offers up to 21 SEER high-efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ20VC can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 21 SEER Performance
- UP TO 10 HSPF
- Variable-speed swing and scroll compressors
- ComfortNet™ Communicating System-compatible
- Daikin Inside variable-speed compressor
- High-efficiency ECM indoor condenser fan motor
- Refrigeration-grade premium 7mm copper tubing and aluminum fin condenser coil
- Daikin Inside Intelligence constantly monitor the system for trouble spots
- Acoustically engineered high-density sound control blanket for quiet operation
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ18VC
When properly matched and installed, your ComfortNet™- compatible DZ18VC Variable- Speed Heat Pump offers up to 19 SEER high-efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ18VC can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 19 SEER Performance
- Up to 10 HSPF
- Variable-speed swing and scroll compressors
- ComfortNet™ Communicating System-compatible
- Daikin Inside variable-speed swing compressor
- Quiet
- three-speed condenser fan motor
- Refrigeration-grade premium 7mm copper tubing and aluminum fin condenser coil
- Daikin Inside Intelligence constantly monitor the system for trouble spots
- Acoustically engineered high-density sound control blanket for quiet operation
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ18TC
When properly matched and installed, your ComfortNet™- compatible DZ18TC Heat Pump offers up to 19 SEER high efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ18TC can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 19 SEER Performance
- Up to 10 HSPF
- ComfortNet™ Compatible
- ComfortNet™ Communicating System-compatible
- High-efficiency two-speed scroll compressor
- Copeland® CoreSense advanced diagnostics monitors the system for trouble spots
- Refrigeration-grade premium copper tubing and aluminum fin condenser coil
- Acoustically engineered high-density sound control blanket for quiet operation
- Specialized time-delay defrost technology
- Factory-installed in-line filter drier
- Factory-installed heater band and accumulator
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ16TC
When properly matched and installed, your ComfortNet™- compatible DZ16TC Heat Pump offers up to 16 SEER high efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ16TC can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 16 SEER Performance
- Up to 9.75 HSPF
- ComfortNet™ Compatible
- ComfortNet™ Communicating System-compatible
- High-efficiency two-stage scroll compressor
- Copeland® CoreSense advanced diagnostics monitors the system for trouble spots
- Refrigeration-grade premium copper tubing and aluminum fin condenser coil
- Acoustically engineered sound control blanket for quiet operation
- Specialized time-delay defrost technology
- Factory-installed in-line filter drier
- Factory-installed heater band and accumulator
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ16SA
When properly matched and installed, your DZ16SA Heat Pump offers up to 16 SEER high-efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ16SA can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler that includes a variable-speed blower motor. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 16 SEER Performance
- Up to 9.5 HSPF
- High-Efficiency Scroll Compressor
- Copeland® CoreSense advanced diagnostics monitors the system for trouble spots
- Refrigeration-grade premium copper tubing and aluminum fin condenser coil
- Acoustically engineered sound control blanket for quiet operation
- Specialized time-delay defrost technology
- Factory-installed in-line filter drier
- Factory-installed heater band and accumulator
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ14SA
When properly matched and installed, your DZ14SA Heat Pump offers up to 15 SEER high-efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ14SA can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 15 SEER Performance
- Up to 9.0 HSPF
- Energy-Efficient Scroll Compressor
- Energy-efficient scroll compressor
- Copeland® CoreSense advanced diagnostics monitors the system for trouble spots
- Refrigeration-grade premium copper tubing and aluminum fin condenser coil
- Acoustically engineered sound control blanket for quiet operation
- Specialized time-delay defrost technology
- Factory-installed in-line filter drier
- Factory-installed heater band and accumulator
- Single-speed condenser fan motor
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed
DZ14SN
When properly matched and installed, your DZ14SN Heat Pump offers up to 15 SEER high-efficiency performance. The higher the SEER, the greater the efficiency - and the lower the operating cost compared to lower SEER units. In many applications, the efficiency of your DZ14SN can be enhanced by using it in conjunction with a Daikin brand gas furnace or air handler. This unit features a powder-paint finish over heavy-gauge galvanized steel that provides premium durability and excellent UV protection.
Features
- Up to 15 SEER Performance
- Up to 9.0 HSPF
- Energy-efficient compressor
- Energy-efficient compressor
- Refrigeration-grade premium copper tubing and aluminum fin condenser coil
- Time-delay defrost technology
- Factory-installed in-line filter drier
- Factory-installed heater band and accumulator
- Quiet condenser fan motor
- Heavy-gauge galvanized steel cabinet with sound-control top
- Baked enamel finish protects the system from the elements
- AHRI certified; ETL listed